Avocent PM 1000 - Commit; Revert; Show;Ls

50 Avocent PM PDU Installer/User Guide
Syntax:
--:- / cli-> set <Path> <Parameter>=<Value>
After a parameter has been changed using the set command, a pair of asterisks appear at the
beginning of the CLI prompt.
**:- / cli->
Save the change:
**:- / cli-> commit
-or-
Undo the change:
**:- / cli-> revert
NOTE: After a commit or revert command, the asterisks at the beginning of the CLI prompt are replaced by
hyphens. Asterisks will not appear after the execution of the set command if using wizard mode, which can be
recognized by a prompt that has a pound sign after the colon and the current directory in square brackets
(example, --:#- [hosts] cli->).
commit
Save settings.
Syntax:
**:- settings cli-> commit
revert
Undo a previous parameter setting.
Syntax:
**:- / cli-> revert
show/ls
Show the available directories, commands or parameters at the current location.
Syntax:
--:- / cli-> show
-or-
--:- / cli-> ls
Example:
--:- / cli-> show user_profile