Chapter 4: Accessing the PM PDU via the Command Line Interface 61
Network/Firewall
Enter cd network/firewall to navigate to the firewall level.
--:- / cli-> cd network/firewall
NOTE: To set a rule, you must enable the interface, set the rule for the interface and physically connect the
interface to the network.
Table 4.9: Network/Hosts Options
Hosts Navigation Tree
hosts
127.0.0.1
alias=
hostname=
Table 4.10: Network/Firewall Options
Firewall Navigation Tree
firewall
ipv4_filter_table
FORWARD
INPUT
OUTPUT
ipv6_filter_table
FORWARD
INPUT
OUTPUT