What to do if Avtech AVC798 DVR is not working when pressing any button?
If your Avtech DVR isn't working when you press any button, it might be in “Key Lock” mode. Press any key and enter the password to exit this mode.
Why can't I use the IR remote control for my Avtech AVC798 DVR?
If you can’t use the IR remote control with your Avtech DVR, check whether the batteries are installed. Also, ensure you are aiming at the IR receiving zone to control the DVR operation.
General| Model | AVC798 |
|---|---|
| Video Input | 8 Channels |
| Recording Resolution | Up to 1080p |
| Compression Format | H.264 |
| Power Supply | DC 12V |
| Audio Input | 1 Channel |
| Audio Output | 1 Channel |
| PTZ Control | Yes |
| Backup Method | USB, Network |
| Video Output | HDMI, VGA |
| Storage | Supports up to 6TB HDD (not included) |
| Network Interface | Ethernet |
| Remote Access | Yes, via mobile app and web browser |
| Mobile Surveillance | Yes |
| USB | 2 USB 2.0 ports |
To Next Page
