FREQUENTLY-USED FUNCTIONS
28
1) NETWORK TYPE
Select the network type as STATIC and set all the information needed in the DVR.
3) NETWORK INFORMATION (IP / GATEWAY / NETMASK)
Key in all the network information obtained from your ISP (Internet Service
Provider).
4) DNS (PRIMARY DNS / SECONDARY DNS)
Key in the IP address of the domain name server obtained from your ISP (Internet
Service Provider).
5) PORT
The valid number ranges from 1 to 9999. The default value is 80. Typically, the
TCP port used by HTTP is 80. However in some cases, it is better to change this
port number for added flexibility or security.
6) SAVE NETWORK SETTING
Click “APPLY” to confirm the settings.
5.8 Event Notifications
It’s available to set event notifications to FTP / E-Mail from this DVR.
Note: This function requires Internet access. Please make sure your Internet
access is available for this function to work properly.
5.8.1 FTP
When this function is enabled and an event occurs, a html file including a link will be sent
to the specified FTP site. Click the link to access to this DVR and check the event
recording.
ADVANCED CONFIG
CANERA
To Next Page
Loading...
