Settings Overview
• Noise Reduction
Improve the picture quality by reducing noise.
• MPEG Noise Reduction
Reduce MPEG block noise to provide clearer edge transitions.
• Colour Temperature
Adjust how warm (red) or cool (blue) the white areas of an image appears.
• Expert Settings
Adjust advanced picture settings based on your viewing preference.
• Overscan
Change the video size setting to crop the edges of the displayed image.
This function may not be applicable in some models/countries/regions.
• Reset Current Mode
Restore all the picture settings in the current picture mode to the factory default values.
Related information
Picture Issues on page 77
Expert Settings Setup
Press / button on your remote control and select Settings > Picture > Picture Mode Settings >
Expert Settings.
Adjust the colour space and Gamma to best suit the content you are viewing. Options may not be applicable
depending on your model/country/region and the picture mode you selected.
• Colour Gamut
Change the range of colours the TV displays.
This function may not be applicable in some models/countries/regions.
• Colour Tuner
Adjust the Hue, Saturation and Brightness of colour settings.
• White Balance
Adjust the intensity of red, green and blue to view the true colour of all images in the picture.
• Black Level
Adjust the HDMI Black Level to enhance current content.
• Gamma Adjustment
Adjust the Gamma to alter how the TV will respond to grayscale content. In low ambient light choose a
higher number, in brighter ambient light select a lower number. The default setting of 2.2 is recommended
for most ambient light conditions.
This function may not be applicable in some models/countries/regions.
• Gamma Calibration
Adjust selected Gamma curve.
This function may not be applicable in some models/countries/regions.
49
To Next Page
Loading...
