Settings Overview
Check the Internet Connection Status
Press / button on your remote control and select Settings > Network > Internet Connection.
Test the current network connection status and view the current network information.
Connection Test
Press / button on your remote control and select Settings > Network > Internet Connection >
Connection Test.
Start a network connection test.
Network Information
Press / button on your remote control and select Settings > Network > Internet Connection >
Network Information.
View information about your network connection.
Related information
My TV cannot connect to the network. on page 71
Connect to a Wired (Ethernet) Network on page 6
Connect to a Wireless Network on page 7
Turn on the TV through the Internet
Wake on Cast
Press / button on your remote control and select Settings > Network > Wake on Cast.
You can enable or disable Wake on Cast function which is able to remotely wake up the TV through external
devices.
Note:
• This function may not be applicable in some models/countries/regions.
• Enabling this function may result in higher energy consumption.
Wake on LAN
Press / button on your remote control and select Settings > Network > Wake on LAN.
With a wired Ethernet connection and enabling Wake on LAN, you can switch on the TV from standby and
push content to be viewed on the TV with a mobile device App supporting the screencast function.
Note:
• To use this function, make sure your TV and mobile device are connected to the same network
environment.
• Enabling this function may result in higher energy consumption.
• This function may not be applicable in some models/countries/regions.
Wake on wireless network
Press / button on your remote control and select Settings > Network > Wake on Wireless
Network.
55
To Next Page
Loading...
