Settings Overview
Note:
• This function may not be applicable in some models/countries/regions.
Sound Mode Settings Setup
Press / button on your remote control and select Settings > Sound > Sound Mode Settings.
Adjust the audio settings of the TV. You can personalise the sound quality by adjusting the following settings.
• Apply Audio Settings
Adjust current sound mode to apply to all sources or just the current source.
• Total Sonics
Optimise the overall sound quality by increasing bass and widening the sound field to provide a clear,
natural dialogue.
This function may not be applicable in some models/countries/regions.
• Total Volume
Maintain a consistent loudness level for a wide dynamic range of programmes, loud commercials and
channel or input changes.
This function may not be applicable in some models/countries/regions.
• Total Surround
Provide surround sound experience with psycho-acoustic processing to place sounds at the side, behind
and above the viewer. For best results use with Total Sonics.
This function may not be applicable in some models/countries/regions.
• Bass Boost
Bass Boost uses DTS TruBass™ to enhance the perception of bass frequencies to provide deep, rich bass
response from the TV's internal speakers.
This function may not be applicable in some models/countries/regions.
• Surround Sound
Surround sound uses DTS TruSurround™ to deliver an immersive surround sound experience from the
TV’s internal speakers.
This function may not be applicable in some models/countries/regions.
• Dialog Clarity
Dialog Clarity uses DTS Dialog Clarity™ to boost the frequency range of the human voice so dialogue is
clearly understood and heard above audio or surround effects.
This function may not be applicable in some models/countries/regions.
• TruVolume
Automatic control over large volume changes while watching TV programmes or films, providing a more
comfortable and consistent volume.
This function may not be applicable in some models/countries/regions.
• Equalizer
Boost the volume at different frequencies.
This function is only applicable when TV Speaker is selected at / > Settings > Sound >
Speakers > Audio Output.
51
To Next Page
Loading...
