AWA IR706 - Internet Radio Quick Start Guide

5
Internet Radio Quick Start Guide
What you need before you can use your Internet Radio
☺ Thanks for your buying! Before use it, you need to know followings:
Wireless LAN Setting:
• A broadband Internet connection.
• A wireless access point (Wi-Fi) connected to your broadband Internet, preferably via a router.
• If your wireless network is configured to use Wired Equivalent Privacy (WEP) or Wi-Fi Protected
Access (WPA) data encryption, you need to know the WEP or WPA code so you can get the
Internet Radio to communicate with the network.
• If your wireless network is configured for trusted stations, you will need to enter the Radio’s MAC
address into your wireless access point. To find the Radio’s MAC address, use menu items as
follows:
Main menu  System settings  Network  View settings  MAC address
 To enter the MAC address into your wireless access point, you must read the instructions
supplied with the wireless access point.
Before you continue, make sure that your wireless access point is powered up and
connected to your broadband Internet. To get this part of the system working, read the
instructions supplied with the wireless access point is highly recommended!