EOC 1-32 | EOC 2-32
Ethernet over Coax |
Peer to Peer
Operation instructions
IMPORTANT: EOC 1-32 and EOC 2-32 may only be used if the forward path frequency range starts from 258 MHz. When
using the EOC 1-32 or EOC 2-32, the signals transmitted below this frequency are omitted (FM radio, DAB etc.). If this is not
observed, frequency overlapping and interference will occur.
If you are unsure, have your television distribution system checked. Under certain circumstances, components in the system
may need to be replaced.
To Next Page
Loading...
Need help?
General
