Operation instructions | EOC 1-32 | EOC 2-32 | Ethernet over Coax | Peer to Peer
4 2020-10-09 | Technical improvements, changes in design, printing- and other errors expected.
1. Product description
The EOC 1-32 and EOC 2-32 respectively, use the G.hn standard to build an Ethernet-over-coax network via the
coaxial cables of the house installation.
EOC 1-32 and EOC 2-32 use the return path range of 5...204 MHz. Therefore, all components in the distribution
network must be suitable for return path.
The device types EOC 1-32 and EOC 2-32 may only be used in a CATV network if the forward path frequency
range of the CATV network starts from 258 MHz.
To Next Page
Loading...
Need help?
General
