6.
Parking Brake Inhibit
• When the “BRAKE” cable is connected to the brake switch, the video playback will be controlled
by the system setup and input video sources.
• Park brake function is overridden when the video source is set to REVERSE.
• When the car is moving ahead, if video is played, WARNING will appear on the screen and then
it will go blank. The warning screen will prevent the driver watching images. The passengers in
the rear seats can watch normally.
Mute
Press [ VOL / / MUTE ] knob to mute the volume from the unit. Press again to restore the
volume. Adjusting the volume or using any of the audio setup features cancels the mute function.
Power On / Off
Press the [ VOL / / MUTE ]
k
nob on the unit to turn the unit on. The buttons on the front of the
unit light up for a moment and the last working mode appears on the screen.
Press and hold the [ VOL /
/ MUTE ] knob to power off the unit.
the Setup menu.
Playing Source Selection
Press the [ ] button on the front panel to display the
source menu.
1.
or : Touch to view the previous or next page of playing
sources.
2. Playing source icon: Touch to access corresponding work
mode.
3. Clock/Date
4. EQ: Touch to access Equalizer level settings menu.
Volume Adjustment
To increase or decrease the volume level, turn the [ VOL / /
MUTE ] knob on the front panel. The volume range is from “0” to
“50”. The screen displays the volume level for 3 seconds.
EQ Menu
The Audio Control feature allows for easy adjustment of your audio system to match the
acoustic characteristics of your vehicle. These vary depending on the type of vehicle and its
measurements. Proper setting of the Fader and Balance boosts the effects of the equalizer.
Basic Operations
To Next Page
Loading...
Need help?
General
