Axis AX1507BT User Manual

7.
Select Preset Equalizer
1. Enter the EQ setup mode
Touch the [
] icon in the user interface and the EQ setup
interface will display on the screen.
2. Select EQ mode
Touch the desired EQ selection: [ Optimal ] / [ Classic ] / [ Rock ]/
[ Jazz ] / [ Techno ] / [ Pop ], and the EQ mode will change.
Adjust EQ Parameters
To adjust EQ parameters, touch and drag the parameters/
adjustment bar.
[ User ]: Set the desired audio effect.
[ Flat ]: Select the original audio effect.
[ Reset ]: Cancel the equalizer function settings.
[ Loud: On/Off ]: When listening to music at low volumes, this
feature will selectively boost certain bass and
treble frequencies.
Adjust FAD BAL
Adjust front/back/left/right balance of the speakers and subwoofer
volume to achieve your preferred listening effects.
1. Enter the EQ setup mode
Touch the [
] icon in the EQ interface.
2. Adjust subwoofer volume
Touch [
] / [ ] or drag [ ] under "Sub" to adjust subwoofer
volume from -12 to +12.
3. Adjust fader / balance value
Touch [
] / [ ] / [ ] / [ ] to adjust fader / balance value
from -20 to +20.
[
]: Front speaker
[
]: Rear speaker
[
]: Left speaker
[
]: Right speaker
Notes:
1. The EQ mode will change to ‘User’ automatically when you adjust
the frequency value in all modes besides ‘User’.
2. The value of Sub is independent of EQ mode and can be
adjusted separately.
Basic Operations

Axis AX1507BT Specifications

General

Brand	Axis
Model	AX1507BT
Category	Car Stereo System
Language	English