Axis M1011 User Manual

AXIS M1011/M1011-W/M1031-W Installation Guide Page 3
ENGLISH
AXIS M1011/-W & AXIS M1031-W
Installation Guide
This installation guide provides instructions for installing the AXIS M1011/-W / AXIS M1031-W
Network Camera on your network. For all other aspects of using the product, please see the User’s
Manual, available on the CD included in this package, or from www.axis.com/techsup
Installation steps
1. Check the package contents against the list below.
2. Hardware overview. See page 4.
3. Install the hardware. See page 5.
4. Assign an IP address. See page 6.
5. Set the password. See page 9.
6. Configure the wireless connection. See page 11.
(AXIS M1011-W/M1031-W only)
Package contents
Item Models/variants/notes
Network Camera AXIS M1011
AXIS M1011-W
AXIS M1031-W
Indoor power adaptor
(country specific)
PS-H* or PS-V
Europe, UK, USA/Japan, Australia, Korea, Argentina, China
*power adaptor extension cable 1.8m (5.9ft), PS-H only
Camera stand Including fitted extension section and 4 mounting screws/plugs
Flexible clamp For shelf mounting
CD AXIS Network Video Product CD, including product documentation,
installation tools and other software
Printed Materials AXIS M1011/M1011-W/M1031-W Installation Guide (this document)
Axis Warranty Document
Important!
This product must be used in
compliance with local laws and
regulations.

Axis M1011 Specifications

General

Product color	White
Operating temperature (T-T)	0 - 50 °C

Weight and Dimensions

Weight	94 g
Dimensions (WxDxH)	58.9 x 94.9 x 34.2 mm