Page 10 AXIS M11 Series
3. Enter a password and then re-enter to confirm the spelling. Click
OK. The password has now been configured.
4. To log in, enter the user name “root” in the dialog as requested
Note: The default administrator user name ”root” cannot be deleted.
5. Enter the password as set above, and click OK.
If required, click Yes to install AMC (AXIS Media Control), which allows
viewing of the video stream in Internet Explorer. You will need
administrator rights on the computer to do this. If required, click the link
to install missing decoders. The Live View page of the AXIS M11 Series
network camera appears. The Setup link to the right gives you menu
options that allow you to customize the camera.
To configure the
password directly via an unencrypted
connection, enter the password here.
To create an HTTPS connection, start
by clicking this button.
To Next Page
Loading...
Need help?
General
