14
AXIS P3301/AXIS P3304
Video & Audio settings
This section describes how to configure the camera, and is intended for product Administrators, who have unrestricted access
to all the configuration menus via the Setup link; and Operators, who have access to the settings under Basic Setup, Video &
Audio and Events.
You can configure the camera by clicking Setup in the top right-hand corner of the Live View page. Click on this page to
access the online help that explains the setup tools.
Video Stream
The video stream settings are separated into 4 different
tabs:
•Image
•Audio
• H.264
•MJPEG
Image
Image Appearance
Use these settings to modify the image resolution and
compression. Setting the compression level affects the image quality and the amount of bandwidth required, the lower the
compression, the higher the image quality with higher bandwidth requirements. The image can also be mirrored (reversed) and
rotated.
See the online help files for more information.
Video Stream
To avoid bandwidth problems on the network, the frame rate allowed to each viewer can be limited. Select the Unlimited
radio button to allow the highest available frame rate or select the Limited to... radio button and enter a value (1-30) fps in
the field.
To Next Page
Loading...
Need help?
General
