44
AXIS P3301/AXIS P3304
4. After the upgrade is complete (1-10 minutes), the unit automatically restarts and shows a steady green on the
Power and Status LEDs and flashing green or amber on the Network LED.
5. Re-configure the camera, referring to the installation guide.
If the emergency recovery procedure does not get the camera up and running again, please contact Axis support at
www.axis.com/techsup/
Axis Support
If you contact Axis support, please help us to help you solve your problems by providing the server report, the log file and a
detailed description of the problem.
Server Report - go to Setup > System Options > Support > Support Overview. The server report contains important
information about the server and its software, as well as a list of the current parameters.
The Log file is available from Setup > System Options > Support > Logs & Reports. The Log file records events in the unit
since the last system restart and can be a useful diagnostic tool when troubleshooting.
To Next Page
Loading...
