What does it mean if the Status and Network indicator LEDs are flashing red rapidly on Axis Security Camera?
If the Status and Network indicator LEDs are flashing red rapidly on your Axis Security Camera, this indicates a hardware failure. Contact your Axis reseller.
How to troubleshoot problems with the H.264 format on Axis P3346 Security Camera?
If you're encountering problems with the H.264 format on your Axis Security Camera, first check that the relevant H.264 connection methods and the correct interface are enabled in the AMC client Control Panel. Ensure that RTSP is enabled under System Options > Network > TCP/IP > Advanced. Confirm with your network administrator that the multicast addresses used by the Axis product displayed in the client are valid for your network. Check if your router supports multicasting or if the router settings between the client and the product need configuration. Set your display to 16-bit or 32-bit color. Enable Advanced Video Rendering from the Video tab in the AMC Control Panel and ensure your graphics card uses the latest driver. You might also need to modify the settings for your graphics adapt...
General| Total megapixels | 3 MP |
|---|---|
| Maximum resolution | 2048 x 1536 pixels |
| Supported video modes | 1080p |
| Video formats supported | H.264, M-JPEG, MPEG4 |
| Supported graphics resolutions | 2048 x 1536 (QXGA) |
| Pan range | 0 - 360 ° |
| White balance | Auto |
| Tilt angle range | 0 - 160 ° |
| Angle of rotation | 340 ° |
| Camera shutter speed | 1/35500 - 1/6 s |
| Minimum illumination | 0.08 lx |
| Sensor type | CMOS |
| Optical sensor size | 1/3 \ |
| Security algorithms | 802.1x RADIUS, HTTPS |
| Video motion detection | Yes |
| Audio formats supported | AAC |
| Cabling technology | 10/100Base-T(X) |
| Supported network protocols | IPv4/v6, HTTP, HTTPS, QoS L3, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS |
| Dimensions (WxDxH) | 96 x 148 x 101 mm |
| Compliance industry standards | IEEE 802.3u, IEEE 802.3af |
| Power source type | PoE |
| Certification | EN 55022 B, EN 61000-3-2, EN 61000-3-3, EN 55024, EN 61000-6-1, EN 61000-6-2, FCC 15 B B, ICES-003 B, VCCI B, C-tick AS/NZS CISPR 22, EN 60950-1 |
| Processor model | ARTPEC-3 |
| Placement supported | Indoor |
| Flash memory | 128 MB |
| Compatible memory cards | SD, SDHC |
| Housing material | Polycarbonate (PC) |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 15 - 85 % |
Weight and Dimensions| Weight | 490 g |
|---|
Product safety compliance with IEC/EN 60950-1 standards for information technology equipment.
Steps to access the product's interface using a web browser.
Instructions for configuring the router to allow external access to the product.
Procedure for setting the initial administrator password for secure access.
Overview of the controls and layout available on the product's live view interface.
Information on controlling the camera's pan, tilt, and zoom functions.
Provides shortcuts to essential settings before using the product.
Settings for defining video stream parameters like resolution and compression.
Predefined sets of stream settings for quick configuration and use in action rules.
Access to advanced image settings for the Axis product.
Defines the maximum resolution and frame rate, affecting the camera's angle of view.
Cropping parts of the image to create separate video sources with unique stream and PTZ settings.
Configuration of camera focus and zoom levels, including manual and automatic adjustments.
Settings for enabling and configuring audio functionality for video streams.
Customizing the Live View page by defining features like stream profile and viewer settings.
Selecting the default method for viewing video images in different web browsers.
Defining and accessing predefined camera views for quick steering.
Setting up automated camera tours that cycle through preset positions.
Detecting and alarming on camera repositioning, lens cover, or defocus.
Configuring motion detection using include/exclude windows and sensitivity parameters.
Step-by-step guide for defining areas where motion detection should be active.
Configuring alarms based on audio levels rising above or falling below a set threshold.
Procedure for uploading, installing, and starting applications on the product.
List of available triggers and conditions that can initiate an action rule.
Step-by-step guide to configure conditions and actions for event-driven rules.
Configuration of recipients for receiving media files and notification messages.
Configuration for continuous video recording to a storage device.
Configuration of user access control, IP filtering, HTTPS, and IEEE 802.1X authentication.
Procedure for resetting the product to its original factory default configuration.
Instructions for downloading and installing the latest firmware for the product.
Steps to recover the product if a firmware upgrade fails or connection is lost.
Specifications for network protocols, security features, and system integration.
To Next Page
