AXIS P7224 Installation Guide Page 5
ENGLISH
AXIS P7224 Video Encoder Blade
Installation Guide
This installation guide provides instructions for installing the AXIS P7224 Video Encoder Blade on
your network. For all other aspects of using the product, please see the User Manual, available on
the CD included in this package, or from www.axis.com/techsup
Installation steps
1. Check the package contents against the list below.
2. Hardware overview. See page 6.
3. Install the hardware. See page 7.
4. Assign an IP address. See page 8.
5. Set the password. See page 11.
Package contents
Contact your dealer if anything is missing or damaged.
Item Models/variants/notes
Video encoder AXIS P7224
CD AXIS Network Video Product CD, including product documentation,
installation tools and other software
Printed Materials AXIS P7224 Installation Guide (this document)
Axis Warranty Document
Extra serial number label
Important!
• To mount the hardware in either the AXIS 291 1U Video Server Rack or the AXIS Q7900
Rack, please see the Installation Guide for the respective encoder rack
• This product must be used in compliance with local laws and regulations.
To Next Page
Loading...
Need help?
General
