Page 8 AXIS P7224 Installation Guide
Assign an IP address
Most networks today have a DHCP server that automatically assigns IP addresses to connected
devices. If your network does not have a DHCP server, blades must be installed one at a time and
the AXIS P7224 will use 192.168.0.90 as the default IP address.
If you would like to assign a static IP address, the recommended method in Windows is either AXIS
IP Utility or AXIS Camera Management. Depending on the number of products you wish to install,
use the method that best suits your purpose.
Both of these free applications are available on the AXIS Network Video Product CD supplied with
this product, or they can be downloaded from www.axis.com
Notes:
• If assigning the IP address fails, check that there is no firewall blocking the operation.
• For other methods of assigning or discovering the IP address of the
AXIS P7224, e.g. in other operating
systems, see page 13.
Method Recommended for Operating system
AXIS IP Utility
See page 9
Single video encoder
Small installations
Windows
AXIS Camera Management
See page 10
Multiple products
Large installations
Installation on a different subnet
Windows 2000
Windows XP Pro
Windows 2003 Server
Windows Vista
Windows 7
To Next Page
Loading...
Need help?
General
