Need help?Do you have a question about the Axis P9106-V and is the answer not in the manual?
General| IK code | IK10 |
|---|---|
| Form factor | - |
| Mounting type | Ceiling/wall |
| Product color | Black, White |
| Housing material | Aluminium, Zinc |
| Protection features | Dust resistant, Waterproof |
| International Protection (IP) code | IP66 |
| Sensor type | CMOS |
| Progressive scan | Yes |
| Number of sensors | 1 |
| Optical sensor size | 1/3 \ |
| Fixed focal length | 1.8 mm |
| Maximum aperture number | 2.4 |
| Tilt angle range | -5 - 5 ° |
| Camera shutter speed | 1/32500 - 1/5 s |
| Minimum illumination | 0.34 lx |
| Bit rate control | Variable Bit Rate (VBR) |
| Total megapixels | 3 MP |
| Maximum resolution | 2016 x 1512 pixels |
| Image quality adjustment | Brightness, Contrast, Saturation, Sharpness |
| Video compression formats | AVC, M-JPEG, MPEG4 |
| Supported graphics resolutions | 320 x 240, 640 x 360, 1920 x 1080 (HD 1080) |
| Streaming method | Multicast |
| Cabling technology | 10/100Base-T(X) |
| Networking standards | IEEE 802.3af, IEEE 802.3at |
| Supported network protocols | IPv4, IPv6 USGv6, HTTP, HTTPS , SSL/TLS , QoS Layer 3 DiffServ, FTP, SFTP, CIFS/SMB, SMTP, Bonjour, UPnP , SNMP v1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS, SSH, LLDP |
| Type | IP security camera |
| PTZ modes | Digital PTZ |
| Certification | EN 55032 Class A, EN 55024, FCC Part 15 Subpart B Class A, ICES-003 Class A, VCCI Class A, RCM AS/NZS CISPR 32 Class A, KC KN32 Class B, KC KN35, IEC/EN/UL 60950-1, IEC/EN 60529 IP66, IEC/EN 62262 Class IK10, IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-6, IEC 60068-2-14, IEC 60068-2-27, IEC 60068-2-78 IEC 60721-3-5 5M3, NIST SP500-267 |
| Languages support | CHI (SIMPL), CHI (TR), DEU, ENG, ESP, FRE, ITA, JPN, KOR, POL, POR, RUS |
| Number of languages | 12 |
| Placement supported | Indoor |
| Connectivity technology | Wired |
| Built-in HDD | No |
| Flash memory | 256 MB |
| Compatible memory cards | MicroSD (TransFlash), MicroSDHC, MicroSDXC |
| Power source type | PoE |
| Power consumption (max) | 3.2 W |
| Power consumption (typical) | 2.8 W |
| Storage temperature (T-T) | -40 - 65 °C |
| Operating temperature (T-T) | -15 - 50 °C |
| Operating relative humidity (H-H) | 15 - 85 % |
| Harmonized System (HS) code | 85258900 |
Weight and Dimensions| Depth | 122 mm |
|---|---|
| Width | 146 mm |
| Height | 92 mm |
| Weight | 655 g |
Steps to access the camera via a web browser using its IP address or host name.
Recommendations for creating and managing secure passwords for the device to protect data.
Procedure to set the initial administrator password for secure access.
Configuring network storage for saving video recordings directly from the camera.
Creating rules to automate actions based on detected events like motion.
Setting up recording to start before and after motion detection events.
Procedure to restore the camera to its original factory default settings.
Instructions on how to update the camera's firmware to the latest available version.
Common problems and their solutions, including firmware, IP address, and browser access issues.
Troubleshooting IP address conflicts and subnet issues for network connectivity.
Solutions for issues preventing browser access, login, or certificate errors.
Diagnosing and resolving issues related to H.264 and Motion JPEG stream quality and performance.
To Next Page
