24
AXIS Q19 Series - Video & Audio
Record
To record a new clip using the microphone:
1. Select the Record radio button.
2. Enter a descriptive Name.
3. If the recording should not start immediately upon clicking the Record... button, enter the number of seconds to wait
before recording actually starts.
4. Enter the number of seconds to record.
5. Click Record... to start the recording. Once started the recording cannot be aborted.
Notes:
• The Status indicator flashes amber while waiting to record and flashes red while recording.
• If audio quality is not satisfactory, try adjusting the Input gain under Audio Settings.
• Recording time is limited to 60 seconds.
Upload a sound file
To upload a clip from a local hard drive or network disk, select the Upload radio button. Enter a descriptive name, click the
Browse button and navigate to the desired file. Click Upload.
To specify a clip location, select the Location radio button and enter the Name and location under Location. Click Add clip.
To Next Page
Loading...
Need help?
General
