Need help?Do you have a question about the Axis Q7411 and is the answer not in the manual?
General| Video Compression | H.264, MJPEG |
|---|---|
| Security | Password protection, IP address filtering, HTTPS encryption, IEEE 802.1X network access control, digest authentication, user access log |
| Type | Video Encoder |
| Ethernet | 10/100/1000 Mbps |
| Audio Compression | AAC, G.711 |
| Protocols | IPv4, IPv6, HTTP, HTTPS, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, DNS, NTP, UPnP |
| Power | PoE (IEEE 802.3af), 12 V DC |
| Input | Analog video, audio |
| Output | Ethernet, audio, alarm |
| Resolution | Up to 1920x1080 |
| Frame Rate | Up to 30 fps |
Instructions on accessing the product using a web browser and its IP address or host name.
How to configure the product for external access via the internet through a router.
Steps to set the initial administrator password for secure access.
Details on configuring H.264 video streams using different protocols like RTP and RTSP.
Guide to configuring video stream settings including image, H.264, and MJPEG.
Specifies default viewing methods for different browsers like IE, Chrome, Firefox.
How to save and access specific camera views for quick positioning.
Procedure for defining a default home position for the camera.
Guide to defining conditions and actions for automated event responses.
Configuration settings related to user access control, passwords, and network security.
Step-by-step guide for updating the product's firmware.
Steps to recover the product if it becomes unresponsive after a failed firmware upgrade.
To Next Page
