Axxess ASWC User Manual

axxessinterface.com 800.221.0932
So let’s begin the remapping process:
1)IdeallyhavingtheASWCvisibleisrecommendedsinceyoucanseetheledashestoconrm
button recognition.
2) Turning off the radio is recommended
3)Withintherst20secondsofturningtheignitionon,pressandholddowntheVolumeUpbutton
for at least 25 seconds.
4) The led will light up solid red. Release Volume Up and the led will go out. Volume Up has now
been programmed.
5) Follow the list below in order however pushing the steering wheel control button you want for the
function below. If you want to skip a command press the Volume Up on the steering wheel, this
will tell the ASWC to skip the command and go to the next one.
1. Volume Up
2. Volume Down
3. Seek Up/Next
4. Seek Down/Prev
5. Source/Mode
6. Mute
7. Preset Up
8. Preset Down
9. Power
10. Band
11. Play/Enter
12. PTT (Push To Talk)
13. On Hook
14. Off Hook
15. Fan Up
16. Fan Down
17. Temp Up
18. Temp Down
* Note: Remember not all radios will have all these commands. Please refer to the radios’ owners
manualforspeciccommandsrecognizedbytheradio.
For instance the next command to be mapped is the Volume Down command. Let’s say you want the
Mode button on your steering wheel to be the Volume Down command. Hold down the Mode but-
ton till the led lights up solid red, and then release it. Now your Mode button on the steering wheel is
Volume Down.

Axxess ASWC Specifications

General

Type	Steering Wheel Control Interface
Updateable	Yes
Programming	Automatic or manual programming options
Installation	Plug-and-play installation with vehicle-specific harness
Functionality	Retains steering wheel control functions
Vehicle Coverage	Covers a wide range of vehicles
Connector Type	Vehicle-specific wiring harness
Firmware Updates	Yes