Axxess ASWC User Manual

axxessinterface.com 800.221.0932
6) After the last button is programmed on your steering wheel (you do not have to go through the
whole list), hold down the Volume Up button for at least 10 seconds then the led will go out.
Or
After the 18th button is programmed or skipped the led will go out and the remapping is completed.
If for any reason after remapping the steering wheel controls you want to go back to the original steer-
ing wheel control settings, follow these steps:
1)Withintherst20secondsofturningtheignitionon.PressandholddowntheoriginalVolume
Down button (not the Volume Down button you just remapped) for at least 25 seconds.
2) The led will turn on then release the Volume Down button and the led will turn off.
3) The original steering wheel control settings will be restored.

Axxess ASWC Specifications

General

Type	Steering Wheel Control Interface
Updateable	Yes
Programming	Automatic or manual programming options
Installation	Plug-and-play installation with vehicle-specific harness
Functionality	Retains steering wheel control functions
Vehicle Coverage	Covers a wide range of vehicles
Connector Type	Vehicle-specific wiring harness
Firmware Updates	Yes