Azbil AUR355 - Terminal Numbers; Terminal Numbers, Front Panel Item Names

9
Chapter 2. Installation and Wiring

Terminal numbers, front panel item names
Sub-base (sold separately)
Terminal block*
2
RESET switch
DISP switch
Display
Loader jack*
1
Front connector
Front
DIN rail clamp
*1 Also used as a Smart Loader Package jack
*2 Firmly tighten the terminal screws with a torque of 0.5 N·m or less.

Terminal numbers
z
Sub-base terminals
No. Code Function No. Code Function
1 − Not used 13 − Not used
2 AC-H Power supply (H) 14 F Flame detector (F)
3 AC-G Power supply (G) 15 G Flame detector (G)
4 − Not used 16 S1
Shutter output 1
(for AUR355C)
5 NC Flame relay N.C. output 17 S2
Shutter output 2
(for AUR355C)
6 COM Contact output common 18 − Not used
7 FC
Flame output
(with start check)
19 COM1 Input common 1
8 − Not used 20 COM2 Input common 2
9 EV-NO Event output 21 START Start input
10 EV-COM Event output 22 − Not used
11 FL-NO Flame output 23 − Not used
12 FL-COM Flame output 24 RESET Contact reset input