Azbil MIZCON Plus - Wire Specifications

6 AB-6650
4-electrode sensor
Item Specification
Ambient temperature Cooling water: 0 °C to 50 °C (Non-freezing)
Atmospheric air: -10 °C to 50 °C
Ambient humidity 0 %RH to 100 % RH
Rated
operating
conditions
Vibration Max. 9.8 m/s
2
(1 G) at 10 Hz to 150 Hz
Ambient temperature -20 °C to 60 °C
Ambient humidity 5 %RH to 95 % RH (Non-condensing)
Vibration for transport Max. 9.8 m/s
2
(1 G) at 10 Hz to 150 Hz
Environmental
conditions
Transport /
storage
conditions
Vibration for storage Max. 9.8 m/s
2
(1 G) at 10 Hz to 150 Hz
Internal resistance temperature detector (RTD) JIS* JPt100
Weight Part No. 81301430-001 (4 m long cable): 700 g
Part No. 81301430-002 (20 m long cable): 3000 g
Materials Stainless steel, polycarbonate resin
∗Note: JIS: Japanese Industrial Standards
Wire Specifications
Item Wire specifications Max. wiring
length
Condition
Power supply JIS* IV or JIS CVV 2.0 mm
2
or greater ⎯ ⎯
Ground JIS IV or JIS CVV 2.0 mm
2
or greater ⎯ 100 Ω or lower ground resistance
I/O (inputs/outputs) JIS IV, JIS CVV, or KPEV* (for low power circuit)
0.5 mm
2,
, 0.75 mm
2
, 0.9 mm
2
, or 1.25 mm
2
100 m ⎯
4-electrode sensor Accessory cable and extension cable (0.5 mm
2
× 6
cores)
34 m ⎯
∗Note: KPEV is a wiring standard provided by Furukawa Electric Co., Ltd.