Selecting Destinations
Starting navigation
2008 SmartMirror User’s Guide 33
Revision 2.0 AZENTEK, LLC
Starting navigation
With the map open in Preview mode, the destination is shown as a small flag. The
route and the estimated trip time are displayed.
With the map open in Preview mode:
• Tap the
Start Navigation button or simply start driving.
Quitting navigation
•Tap (Back) to quit navigation.
A window prompts you to confirm.
No GPS reception
When GPS signal is interrupted, the following message appears:
"GPS reception is currently not sufficient. Naviga-
tion starts automatically as soon as GPS reception
is OK again."
You have the following options:
• Wait until GPS reception is sufficient for determining position, the route is recalcu-
lated and you can begin navigation.
• Tap the
Cancel button. The MAIN WINDOW opens. Your destination is saved in the
LAST DESTINATIONS list.
• Tap the
Demo button. The route is calculated using the center of the specified loca-
tion as starting point. The simulation of the calculated route begins.
•Tap (
Back) to end the demonstration.
Arriving at your destination
A message displays when you have reached your destination.
Your current position (indicated by an orange triangle) is shown on the map.
To Next Page
Loading...
