Azentek SmartMirror - Managing Saved Routes; Saving Planned Routes; Loading Saved Routes

Working With Routes
Managing routes
2008 SmartMirror User’s Guide 43
Revision 2.0 AZENTEK, LLC
Managing routes
You can save each planned route under a particular name.
You can load, rename or delete stored routes.
Saving routes
You can save a route after you have entered the starting point and at least one route point.
On the R
OUTE PLANNING WINDOW:
1. Tap Options > Save Route.
2. Enter a name for the route.
3. Tap the Save button.
The route is saved to the
SAVED ROUTES list.
Loading routes
On the ROUTE PLANNING WINDOW:
1. Tap Options > Saved Routes.
2. Tap the route you want to load.
3. Tap the
Load Route button.
The
ROUTE PLANNING WINDOW displays the starting point and the route points of the
selected route.
Note: Only the start point and route points are saved. The calculated route is not. If you
load a route that has been saved, it must be recalculated before navigation can begin.