Aztech ADSL2+ Ethernet Router User Manual

ADSL2+ Ethernet USB Combo Router - User Guide
Page 34 of 42
3.7.17 System Password
You can change your ADSL Router’s username and password by clicking on System Password.
You can also change the idle timeout; you will need to log back onto the ADSL Router once the
timeout expires. If you forget your password, you can press and hold the reset to factory defaults
button for 10 seconds (or more). The ADSL Router will reset to its factory default configuration
and all custom configurations will be lost. See
Fig 1-28.
Figure 1-28 : System Password

Aztech ADSL2+ Ethernet Router Specifications

General

Brand	Aztech
Model	ADSL2+ Ethernet Router
Category	Network Router
Language	English