Aztech HomePlug AV User Manual

User Manual
Page 27 of 44
About HomePlug AV Utility
HomePlug AV Utility is a software application that allows you to configure HomePlug AV.
It is mainly used for changing the Private Network Name, detecting other HomePlug AV’s
in the network, and measuring the throughput of devices. Installation is straightforward
and the user interface is easy to use.
Note:
Note:Note:
Note: To use HomePlug AV Utility, you need a computer using a Windows operating system with the .NET
Framework installed. If you do not have .NET installed, the HomePlug AV installer will installer it for you.
Requirements
Your computer must meet the following requirements:

Windows XP (32 and 64 bit), or Vista (32 and 64 bit)
 300 MHz Processor

128 Mb of RAM

.NET Framework

Windows Installer 3.1 for Windows XP (32 and 64 bit)
 Network Interface Card

CD-ROM

128 Mb of free hard disk space

Aztech HomePlug AV Specifications

General

Standard	HomePlug AV
Interface	Ethernet
Encryption	128-bit AES
Operating Temperature	0°C to 40°C
Data Transfer Rate	200 Mbps
Range	300 meters
Plug Type	Varies by region (EU, UK, US)
Operating Humidity	10% to 90% (non-condensing)