Aztech HomePlug AV User Manual

User Manual
Page 28 of 44
Installation
To install HomePlug AV Utility:
1. Insert the Resource CD that comes with HomePlug AV into the CD-ROM drive.
2. Click the Start button, and then click Run.
3. In the Run dialog box, type D:\Setup.exe (where D: is your CD-ROM drive), and
then click OK.
4. Follow the instructions on the installation wizard.
Two applications will be installed in your computer - HomePlug AV Utility will be
installed first followed by .NET Framework. The installer detects any version of
.NET Framework in your computer. If .NET Framework is not installed, a dialog box
opens to ask if you would like to install .NET Framework. Click Yes. The .NET
Framework will not be installed if the required version is already in your
computer.
Operating System
Operating SystemOperating System
Operating System .NET Framework version to be installed
.NET Framework version to be installed.NET Framework version to be installed
.NET Framework version to be installed
XP /Vista/Windows 7 32-bit .NET Framework 3.5 SP 1 32-bit
XP /Vista/Windows 7 64-bit .NET Framework 3.5 SP 1 64-bit

Aztech HomePlug AV Specifications

General

Standard	HomePlug AV
Interface	Ethernet
Encryption	128-bit AES
Operating Temperature	0°C to 40°C
Data Transfer Rate	200 Mbps
Range	300 meters
Plug Type	Varies by region (EU, UK, US)
Operating Humidity	10% to 90% (non-condensing)