Aztech HomePlug AV User Manual

User Manual
Page 38 of 44
To reset to factory default:
1. Connect HomePlug AV to the computer where you are using HomePlug AV Utility.
2. Open HomePlug AV Utility.
3. Click Factory Default.
Note:
Note: Note:
Note: You can also perform a reset to the factory default when you press the RESET button on the device
for 2 seconds.

Aztech HomePlug AV Specifications

General

Standard	HomePlug AV
Interface	Ethernet
Encryption	128-bit AES
Operating Temperature	0°C to 40°C
Data Transfer Rate	200 Mbps
Range	300 meters
Plug Type	Varies by region (EU, UK, US)
Operating Humidity	10% to 90% (non-condensing)