Aztech HomePlug AV User Manual

User Manual
Page 33 of 44
5. Type the Device ID of the remote device. The Device ID can be found on the label
pasted on the device.
6. Click Apply. When the process is complete, the message Settings Applied appears.
After changing the Private Network Name of the remote HomePlug AV, it will no
longer be able to communicate with your local HomePlug AV, unless you use a
similar Private Network Name for your local HomePlug AV.
Simulate Simple Connect Button
Simulate Simple Connect Button allows you to apply functionalities without manually
pressing the Simple Connect button on a HomePlug AV device. However, this only works
on local devices.
Simple Connect
Simple ConnectSimple Connect
Simple Connect Select to search and pair with another device, or search and join
an existing HomePlug AV network.
NMK Randomize
NMK RandomizeNMK Randomize
NMK Randomize Select to reset to a random Private Network Name. A HomePlug
AV using a random Private Network Name will be disconnected from the
HomePlug network and will not be able to communicate with other devices until
it forms a new network or joins an existing network.
AVLN
AVLNAVLN
AVLN Status
StatusStatus
Status Displays the HomePlug AV Logical Network membership status
number.
Note:
Note:Note:
Note: The Simulate Simple Connect Button functions from HomePlug AV Utility can be used for HomePlug
AV versions with or without the Simple Connect button on the device.

Aztech HomePlug AV Specifications

General

Standard	HomePlug AV
Interface	Ethernet
Encryption	128-bit AES
Operating Temperature	0°C to 40°C
Data Transfer Rate	200 Mbps
Range	300 meters
Plug Type	Varies by region (EU, UK, US)
Operating Humidity	10% to 90% (non-condensing)