Aztech HomePlug AV User Manual

User Manual
Page 41 of 44
Do I need an Automatic Voltage Regulator (AVR) for HomePlug AV?
No. HomePlug AV can operate in an environment using 100-240V.
What is the maximum range of HomePlug AV?
The maximum range is 200 meters.
If one HomePlug AV is connected to a LAN switch, is it possible for other computers
in the switch to communicate with other HomePlug AV devices?
Yes.
Can my neighbors access my HomePlug AV network?
Your electric meter prevents any signal from going outside your household. However, we
strongly suggest that you create your own personalized Private Network Name to
prevent unauthorized access into your network.
Can I use HomePlug AV to connect computers located in different floors of the
building?
Yes, as long as the electric wires are connected and do not exceed 200 meters.
Can I use HomePlug AV in an old house with old power supply lines (partly without
separated ground wire)?
Yes. However, performance may be affected because of the quality of the wires.
Can I plug HomePlug AV into a multiple socket switch or do I have to plug it directly
to the wall socket?
You can plug HomePlug AV into a multiple socket switch. However, we strongly advise to
plug it directly to a wall socket to achieve optimal performance.
Do I need electrical grounding for the device?
HomePlug AV does not require electrical grounding.
After a blackout, will HomePlug AV switch on automatically?
Yes. If you experience connection issues, unplug the device and plug it back.

Aztech HomePlug AV Specifications

General

Standard	HomePlug AV
Interface	Ethernet
Encryption	128-bit AES
Operating Temperature	0°C to 40°C
Data Transfer Rate	200 Mbps
Range	300 meters
Plug Type	Varies by region (EU, UK, US)
Operating Humidity	10% to 90% (non-condensing)