B & G V50 VHF User Manual

5-5 Response to individual calls (INDIV REPLY)
You can respond to incoming individual calls with an automatic response or with a manual
response.
An automatic response sends an acknowledgement and then sets the request link channel,
ready for a conversation.
A manual response asks if you want to acknowledge the call, and then asks if you want to
converse with the caller.
1. Select DSC SETUP, then INDIV REPLY.
2. Select AUTO for an automatic response, or MANUAL for a manual response.
3. Press ENT to confirm your choice and return to the menu.
DSC SETUP
GROUP SETU▲
ATIS MMSI
ATIS SELECT
►INDIV REPL▼
INDIV REPLY
MANUAL
►AUTO
5-6 Enable DSC functionality (DSC FUNC)
DSC functionality will operate only after a valid USER MMSI has been entered - see 5-1.
When DSC functionality is selected, the DSC symbol
DSC
is shown on the LCD.
DSC SETUP
ATIS MMSI ▲
ATIS SELECT
INDIV REPLY
►DSC FUNC ▼
DSC FUNC
►ON
OFF
1. Select DSC SETUP then DSC FUNC.
2. Select OFF to disable DSC functionality or s elect ON to enable the DSC functionality - ATIS
(if applicable) must be turned off first.
Note: Disabling DSC functionality is not recommended.
3. Press ENT to confirm.
Note: It is not possible to have both ATIS ON (on) and DSC ON (on) simultaneously. If you
want to activate DSC, you must first switch ATIS off. A warning will remind you if ATIS is
already ON.
B&G - V50 & H50 Operation Instructions40

B & G V50 VHF Specifications

General

Brand	B & G
Model	V50 VHF
Category	Marine Radio
Language	English