B. Braun Vista basic - Page 23

ューー
Software
Control Microprocessor 68hc11
FFxx is displayedin the 7 segment display with flashing dots. FFxx
is the error code.
7 Segment Display Description
ΕΕΟΙ dummy for test
FFO2 battery not present / missing battery current
FFO3 defective RAM memory
FF04 defective program memory - ROM test error 1
FF05 defective program memory - ROM test error 2
FF06 calibration data error from EEPROM
FF07 pump head cycle not plausible
FFO8 failure / inaccuracy of system clock
FFO9 failure 100msec system clock
FF10 reset during active operation
FF12 no dynamic pressure sensor signal (EDB)
FF14 defective temperature sensor
FF16 defective membrane keypad
FF17 defective program memory tube parameters
Table 2 - 2
Vista basic 950971 Rev A (5/04) 2-3