EasyManua.ls Logo

Baader IS-033 - Initial Start-Up Procedure

Baader IS-033
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IS-033
___________________________________________________________________________
_______________________________________________________________________________________
Baader Ísland ehf, Hafnarbraut 25, Kopavogur, Iceland Tel: +354 520 6900 Fax: +354 520 6911
lager@baader.is / www.baader.is
15 Page 15
Initial Start-up Procedure
Prior to starting the machine, remove the preservative from all areas in contact with the
product.
Wash the machine from bottom to top using a low pressure wash (max 30 bar) with drinking
water heated to 60°C.
After cleaning, run the machine briefly; grease to remove any cleaning fluid that may have
penetrated the bearings.