Babolat SENSOR EXPERT - Description of Screens and Menus

Description of screens and menus
Screen 1
MAIN
Display and modification of tension for main strings
25.0 kg
⇒
Current value (default or last-used setting)
Direct modification by pitch of 100 g (0.5 lb) or pitch of 1 kg (10 lb) using
the scolling keys
Tension range: 5 to 40 kg (11.5 to 88 lb)
PS⇔+15 %
⇒
Pre-set value of prestretch on main strings
If prestretch = 0 ⇒ no message
CROSS
Display of tension for cross strings
24.0 kg
⇒
Current value = tension MAIN +/- CROSS correction
-1.0 kg
⇒
Pre-set value of over or under-tension (CROSS correction)
This value appears for 3 seconds
PS⇔+15 %
⇒
Pre-set value of prestretch on cross strings
If prestretch = 0 ⇒ no message
KNOT
Display of tension for knot traction cycle on MAIN and CROSS
Over-tension to compensate for loss of tension in knot
(the command is only valid for a traction cycle)
27.0 kg
26.0 kg
⇒
⇒
Current value on main strings = tension + KNOT correction on main strings
or
Current value on cross strings = tension + KNOT correction on cross strings
+2.0 kg
⇒
Pre-set over-tension value (KNOT correction)
TURNTABLE
Display and selection of turntable locking mode, manual or automatic
-A-
> -A- <
> -M- <
-M-
⇒
⇒
⇒
⇒
Display of selected mode
Free turntable, locked automatically in each traction cycle
Turntable locked in automatic mode
Turntable locked in manual mode
Free turntable in manual mode
ECO
⇒
Indicates that the energy-saving mode is activated
SPEED
Display and selection of pulling head speed
..3..
⇒
Current value. Selection possible from a range of 1 to 5
AUTO
⇒
Indicates that the automatic return of the pulling head is activated
20