Screen 6
20 JAN. 2000 18:35
Date and time updating
DAY
MONTH
YEAR
HOUR
⇒
Modification with the scrolling keys
Sreen 7 - Machine configuration (read only)
WORKING TIME
Length of time for which the machine has been on (in hours)
NR OF RACKETS
Number of rackets strung by machine (approximate value calculated
according to number of tractions)
TRACTION CYCLE
Number of tractions completed by machine
DIAG
Machine status
SERIAL NR
Serial number of machine
RACK NR
Serial number of rack
♦ Factory settings
The factory settings are the current settings when you start the machine up for the first
time. They will remain programmed until you decide to change them.
The factory settings are as follows:
- MAIN: 25.0 kg
- CROSS: -1.0 kg
- PRESTRETCH: 0 %
- KNOT: + 2.0 kg
- TURNTABLE: - M -
- SPEED: 3
- HEAD: YES
- LANGUAGE: depends on the machine's destination country
- BIP : YES
- ECO: NO (mono version only)
- BACK: HAND
26
To Next Page
Loading...
