WWW.BALTIMOREAIRCOIL.COM
50
In the next few screens, additional parameters can be viewed and modified. To access
those screens, press enter.
As described on page 47, scroll through the menus using the up/down arrows. To change
an item, press enter, scroll to the item, and press enter. Once the item value starts to
flash, use the up/down arrows to modify the value and press enter to set the value.
Figure 43. Modifiable Parameters in Status Menu
• Temperature setpoint
• Gas Temperature/Pressure
• Self-Clean Cycle screen (see page 41 for more details)
• Manual Precool on/off
• Daily Drain parameters
• Forced Overnight Dry Operation (see page 42 for more details)
• Default, Energy Save or Water save mode (see page 28 for more details)
• Fan Power, voltage, current and motor Temperature
[1]
(view only)
Submenus
The main menu displays the three submenus available – Status, Technician, and Factory.
NOTE:
1. Optional features that might not
be included in your unit.
Figure 44. Submenus
• Status: Goes back to the default Status screen as described on page 47.
• Technician: See page 49 for more information.
• Factory: This menu is password protected and only available for BAC factory
personnel.
To Next Page
Loading...
