Bacharach PCA3 - Page 25

PCA

3 Manual
0024-9473 Rev 3 25
NOTE: Use the ◄► buttons to quickly scroll to the bottom
and top of the list.
NOTE: In addition to the standard fuels programmed into
the PCA
®
3, Bacharach can develop custom fuel codes
based on the customers specific needs. The PCA
®
3 can be
programmed with 2 additional fuels which can be added to
the instrument using the Fyrite User Software (FUS).
Consult factory for price and delivery.
Figure 4-1. Fuel Selection
4. Press ENT to save the selection and display the CO
2
MAX screen.
5. To accept the default CO
2
Max value for the selected fuel, use the ▲▼
buttons to highlight DEFAULT and press ENT to return to the Hold
screen.
6. To enter a different CO2 Max value, use the ▲▼ buttons to highlight
ADJUST and press ENT to display the Adjust CO
2
Max screen.
7. Use the ▲▼ buttons to set CO
2
Max to a value between 8.0 and
23.0 %, then press ENT to save the new value in memory, and return to
the HOLD screen.
Figure 4-2. CO
2
Max Selection and HOLD Screen