PCA
3 Manual
0024-9473 Rev 3 39
8. Press ESC to go to the Main Menu or the RUN/HOLD key to return to
the Run/Hold screen.
Figure 4-20. Entering a User Name
4.18.2. Clearing a User Name
1. Display the MAIN MENU by pressing the MENU (F2) button. If
necessary, press ESC until MENU appears above F2.
2. Use the ▲▼ buttons to highlight SETUP, and then press ENT to display
the SETUP MENU.
3. Use the ▲▼ buttons to highlight USERNAME, and then press ENT to
display all three lines of the EDIT USERNAME screen. Periods (.....)
identify empty lines.
4. Use the ▲▼ buttons to choose which of the three Username lines to
clear, then press CLEAR (F3) to clear that line.
5. At this time, either return to Step 4 to choose another line to clear, or
end this procedure by highlighting EDIT COMPLETE and pressing the
ENT key to return tot he Setup Menu.
6. Press ESC to go to the Main Menu or the RUN/HOLD key to return to
the Run/Hold screen.
Figure 4-21. Clearing a User Name
4.19. Language
Information on the display screen can be shown in English, French, or Spanish.
Select the desired language as follows.
To Next Page
Loading...
