‐
13
‐
Press
to save and exit.
The settings go into effect after restart.
FAQ
Q: Why does the display not power on?
A: Please check that the battery is connected and has power.
Then check all the wires and connections. Then press the
button again. If this fails, please see your service technician.
Q: What should I do when an error code is displayed?
A: Please check the error code list. Sometimes powering
down the unit (press
), then unplugging the display, leave
it unplugged for two minutes and then plugging it back in
and turning it on will reset and correct the error. Please call
your service technician if the user cannot remove the error.
Warranty
Suzhou Bafang Electric Motor Science‐Technology Co Ltd
(hereinafter to be referred as “8FUN”) warrants that any
products bought from 8FUN that are def ective in materials
and/or workmanship will be repaired or replaced, as 8FUN elects,
if such defect appears within the warranty period as measured
from the date of delivery from the factory to the purchaser. The
warranty period starts from date of Ex‐factory and is in effect for
To Next Page
Loading...
