BAFANG C961 - Installation and Power Management; Installation Guidelines; Powering On and Off

‐
5
‐
Caution: Do not plug in or unplug this display when the
power to the unit is on.
A
void collisions
Protect the display’s membrane to provide water
resistant performance.
Do not attempt to reset parameters if the display
is not working.
Call for service if the C961 display is not working
Installation
Install the display and button control on the handlebar and
adjust its location. Plug it into the controller with power off.
ON/OFF
To turn the unit on, press and hold the  button to start the
display. A long press again
 will switch it off.
The display switches off automatically if there is no
activity for ten minutes (default).