11
BF-UM-C-DP C010-EN November 2022
USER MANUAL FOR DISPLAY
7.7.2.3 “Service tip” Set the service tip
Briefly press the or button (<0.5S)
to select the “Service tip” item, and briefly
press the button to enter the item. Then
select “ON”/“OFF” with the or
button and briefly press the button
(<0.5S) to save and exit back to the "Display
settings" interface.
Note: The default setting is OFF. If the ODO
is more than 5000 km, the "Service tip"
indication will flash.
7.7.2.4 “AL Sensitivity” Set light sensitivity
Briefly press the or button (<0.5S)
to select the “AL sensitivity” item, and briefly
press the button to enter the item. Then
select the level of the light sensitivity as
“OFF”/“1”/ “2”/“3”/“4”/“5” with the or
button and briefly press the button
(<0.5S) to save and exit back to the "Display
settings" interface.
Note: “OFF” means the light sensor is off.
Level 1 is the weakest sensitivity and level 5
is the strongest sensitivity.
7.7.2.5 “Boot Password” Set the boot
password
Briefly press the or button (<0.5S)
to select the “Boot Password” item, and
briefly press the button to enter the
item. Then select the 4-digit number as “0”/
“1”/“2”/“3”/“4”/“5”/“6”/“7”/“8”/“9”with the
or button. After setting, select the
"YES" by briefly pressing the button
(<0.5S) to save and exit back to the "Display
settings" interface.
After back to the "Display settings" interface,
briefly select “ON”/“OFF” with the or
button and briefly press the button
(<0.5S) to save and exit back to the "Display
settings" interface.
Note: The default password is 0000, and the
default setting is OFF.
7.7.2.6 “Reset Password” Reset the boot
password
Briefly press the or button (<0.5S)
to select the “Reset Password” item, and
briefly press the button to enter the
item. Enter the 4-digit old password with the
or button, then enter the new
password and confirm the new password.
After setting, select the "YES" by briefly
pressing the button (<0.5S) to save and
exit back to the "Display settings" interface.
To Next Page
Loading...
Need help?
General
