BAFANG DP C11.UART - Normal Indication Area; Battery level Indication; Power-assistance level indication

6
DISPLAY MANUAL DP C11.UART
NORMAL INDICATION AREA
1
Battery level Indication:
Indicate the current capacity level value.
2
Power-assistance level indication:
Indicate the current level from level 0 to level
5. If no number is displayed, it means no
power-assistance;
means at the mode of
walk assistance.
3
Headlight/Backlight indication:
Only display when headlight/backlight is on.
4
Indicate the current speed unit:
km/h or MPH
5
Multi-function indication:
Including single-trip distance TRIP, total
distance ODO, maximum speed MAX, aver-
age speed AVG, remaining distance RANGE,
output power POWER, Calorie Cal, riding
time TIME. (Note: after switching on the
display, within ten seconds, when detect
the signal of torque sensor or detect it is the
torque sensor, it display the calorie interface;
if detect the remaining distance, it display
the RANGE interface; or it will not display the
two interface)
1
2
3
4
5