BAFANG DP C181.CAN - 7.8 Settings Menu; 7.8.1 Display Settings Configuration; 7.8.1.1 Unit Selection (km;Miles)

9
BF-DM-C-DP C181-EN November 2019
DEALER MANUAL FOR DISPLAY
7.8 SETTINGS
After the display is turned on, press and hold
the and (>1S) button, to access the
“SETTINGS” menu. By pressing the or
(<0.5S) button, you can select: Display
Settings, Information or EXIT. Then press the
(<0.5S) button to confirm your selected
option.
Or select "EXIT" and press the
(<0.5S)
button to return to the main menu, or select
"BACK" and the (<0.5S) button to return
to the Settings interface.
If no button is pressed within 20 seconds,
the display will automatically return to the
main screen and no data will be saved.
You can press and hold the and
(>1S) button at any time, to return to the
main screen.
7.8.1 “Display setting”
Press the or (<0.5S) button to select
Display Settings, and then briefly press the
(<0.5S) button to access the following
selections.
7.8.1.1 “Unit” Selections in km/Miles
Press the
or (<0.5S) button to high-
light “Unit” in the Display settings menu,
and then press the (<0.5S) button to
select. Then with the or button
choose between “Metric” (kilometer) or
“Imperial” (Miles). Once you have chosen
your desired selection, press the (<0.5S)
button to save and exit to the "Display
setting" interface.