BAFANG Ebike Essentials 500C - Introduction and Buttons; Introduction to Display Functions; Control Buttons

INTRODUCTION
The 500C display includes the functions shown below:
• Multiple Power Assist Levels
• Walk Assist (slow speed motor assist)
• Distance and Odometer (TRIP/TOTAL)
• Backlight / Headlight
• Speed based on current riding conditions
• Battery Gauge (Voltage or Percentage)
Note: Voltage is recommended for a more accurate battery capacity estimation
• Error codes
• Power meter (Watts or Amps)
• Storage temperature 30 – 80%
• Operating temperature -4°F to 158°C
• IP65 waterproof
BUTTONS
INTRODUCTION & BUTTONS
Includes control pad with three button electronic switch.
Notes:
2
500C MANUAL © Copyright Ebike Essentials. All Rights Reserved.
www.Bafangusadirect.com
Plus button
Minus button
Power on/off button
Mode button