The function is designed for walking
alongside the bicycle only. Please do not
use this function when riding.
FUNCTION OVERVIEW
With the power on, press and hold both
and buttons at the same time to reset the
temporary data, which includes AVG Speed,
MAX Speed, TRIP and TIME.
These temporary data can’t be erased by
powering off the unit.
Note: This does not reset the Odometer, so
the overall mileage data of your motor will
still be intact.
6
Data Reset:
7
Error Codes:
When the system encounters a problem, an
error code will flash on the display. Check
details on attached list to determine the
cause of the error.
The motor will stop working in the event of
an error and will only work again, when the
error is cleared.
6
500C MANUAL © Copyright Ebike Essentials. All Rights Reserved.
www.Bafangusadirect.com
To Next Page
Loading...
