SPECIFICATIONS
• Maximum operating current: 30mA
• When power off, leak current is less than:
1uA
• Operating current supplied to controller:
50mA
• Operation temperature: -4
°F~113°F
• Storage temperature: -22°F~158°F
• IP level: IP65
• Storage humidity: 30%-70%
SPECIFICATIONS
CAUTION
Bolts provided with display are:
3 – M3 0.5 x 12mm (Control pad hardware and Mount bracket hardware)
During installation do not overtighten the bolts as this will break the brackets!
The unit is IP65 water resistant.
Avoid collisions to prevent damage or malfunction.
4
DPC18 MANUAL © Copyright Ebike Essentials. All Rights Reserved.
www.Bafangusadirect.com
To Next Page
